What is the Pathogen Death Wand?
The PDW strip utilizes the patent and patent pending PDe³™technology, a light spectrum formula that is beneficial for plants and deadly for pathogens. This patented mix of natural wavelength light frequencies delivers extra life to plants while destroying harmful pathogens. By eliminating the use of artificial and synthetic chemicals, the plant can absorb more nutrients. These are the missing spectrums the sun provides but grow lights do not.
No product can kill pathogens completely, but when the PDW light strip is properly installed and adjusted through the plant's growth cycle, it eliminates the dangerous cells faster than they can reproduce. The technology has no negative effect on cannabinoids, terpenes, or potency. PDe³ does not cause molecular ionization (the breaking apart of cellular molecules into ions) and does not produce free radicals due to low energy of photons.
SpectrumGro has done the research.
To validate the PDW strip's effectiveness, we started by testing it in a lab. We worked with a previously failed sample of cannabis to prove the light treatment can eliminate yeast, mold, and most bacteria post-cure. Treating cannabis in grow room conditions is obviously very different than the environment in a controlled lab. Therefore, before we brought the strips to market, we felt it imperative that we conduct studies in the field.
The chronology of studies is as follows: we began by testing failed cannabis in a state-licensed lab. When those treatments proved to be successful, we moved on to test the lights in grow operations to test their efficacy in the field. In each in-field grow study, we sectioned off an area of the grow room and the grower agreed to refrain from spraying herbicides or fungicides on the section of the grow being treated by the PDW's. The balance of the grow was treated with traditional spraying protocol. We took weekly samples from the control group, the plants being treated with the grower's spraying methodology, as well as the PDW group, the plants being treated under the lights. We learned that the plants treated by the PDW light strips contained powdery mildew better than traditional spraying. Here's a rundown of our research.
In the lab test, conducted in January 2017, we wanted to determine the strip's ability to eliminate yeast and mold on previously failed samples. To achieve this, two strips were set approximately six inches apart. Cannabis samples, previously determined to be highly infected with yeasts and molds, were recultured and placed about sixteen inches below the strips on a stainless-steel table surrounded by protective sheets. The samples were tested at 0, 19, 46, 72, 96, and 166 hours. Samples were then plated on 3M PetriFilms and incubated for a minimum of 60 hours. The results showed a reduction in yeasts and molds after 166 hours.
Figure 3 demonstrates the amount of TYMC, or yeast and mold, that were eliminated on each sample.
For our second study, conducted March 2017 through May 2017, we did our first in-field test and treated six strains of cannabis with the PDW strip through a ten week flower and cure cycle. Yeast and mold on the plants decreased below detection and eliminated the need for herbicide treatment. The research followed these plants from their late vegetation through the curing process.
Initially, the PDW light strips were suspended 18-22 inches above the crop and followed a rotation cycle, exposing the plants to twelve hours of light and twelve hours of rest. During that time, colonization of yeast and mold communities slowly increased, typical of cannabis grows as well as other plant life cycles.
We witnessed a slight increase in TYM during weeks five and six so we immediately took samples. This increase made the grower concerned that the lights weren't working and instead of waiting for the lab results, we agreed to allow the grower to spray the portion of the grow that was being treated under the light,s out of his concern for being able to flush the product properly.
As an extra precaution, the lights were lowered to a height of 6 to 8 inches and the strips were left on for 24 hours. These changes had an immediate effect, dropping the rising TYM counts to mostly none detected.
When results came back, it turned out that the levels of TYM from before he sprayed were non detectible, proving the lights' had been effective in remediation.
Herbicides and fungicides are used to kill unwanted growth in plants — like bacteria, fungal pathogens, and powdery mildew. Herbicide treatments attempt to eliminate those target areas while leaving the cannabis plant relatively unharmed. Some of those treatments, however, can interfere with the plant growth and introduce additional, unwanted hormones. If not flushed properly, toxin residue can lead to failed samples and expensive crop loss. Even after passing state testing, the consumer still ingests these questionable substances on the plant.
The lab found that treatment of the PDW strips are comparable to the standard industry practice of fungicide treatments for remediation of TYM.
"Importantly, there are no deleterious effects of PDW strip treatment on cannabis chemotype (potency and terpenes) as compared to control strains," PhytaTech reported.
The first in-field test was successful in eliminating TYM counts, but after witnessing a spike in bacterial growth between weeks five and six, we decided to try again. The purpose of this was to test the strips against normal grow conditions at increasing light intensities -- meaning we increased the number of lights in each grow section and had six to eight lights per 32 square feet and tested three strains. We also wanted to conduct a clean test in which absolutely no sprays were used on the test sample. In doing so, we were able to prove the PDW strips eliminate pathogen growth faster than it can reproduce. The second in-field test was conducted from May 2017 to July 2017.
By increasing the density of coverage from four to six lights per grow area, TYM was completely eradicated on the crop.
"In the state of Colorado, 10,000 ctu/g is the failing level. These levels were never seen during the study. Results on the effects of chemotype testing are in Table 3.
Not only did we remove fungicide from the grow, but we did so without negatively impacting the terpenes and cannabinoids. It's like the plant didn't even know we were there.
The light strip is designed to complement your grow lights and work synergistically within your existing grow operation. We recognize each grow operation is unique so we want to work with your team to design the best combination of the number of strips and the installation configuration needed to create optimal performance. It's most beneficial to provide protection in the vegetation and flowering stages, but PDW strips are most effective when used in every stage, from clone to cure℠
Simply put, if the light emitting from the PDW strip can reach the plant, it will destroy the pathogens. Each PDW strip is designed to cover an approximately 8 sq ft area and protect four to six plants. The strip comes equipped with a hanging mechanism, enabling you to easily tailor the recommended hanging height of 18 to 22 inches to your specific coverage needs.
Dimensions: 1.3''H x 1.2''W x 46''L
Weight: 3 lbs
Each MaxStrip is equipped with plug in power source and hanging mechanism.
Body: Powder coated alumninum
Bulbs: 162 LED diodes
Light source: LED
Frequency Range: 60Hz
Voltage: 120 VAC
Energy Usage: 21 Watt energy
(Average total energy cost is $22/yr.)
5 year manufacturer’s warranty.